[vc_row css=”.vc_custom_1695217790408{padding-bottom: 40px !important;}” conditional_render=”[{"value_role":"administrator"}]”][vc_column][vc_column_text] Crestaform Rapid 2.0 3D Printing Resin Introducing the Crestaform Rapid 2.0 3D printing resin from Scott Bader– a general-purpose resin formula that offers lightning-fast print speed, superior print quality, vibrant colours, robust mechanical capabilities, and improved user-friendliness. Ideal for crafting high-resolution models, intricate figurines, rapid prototyping, and crafting exquisite jewellery pieces. Available in Clear or White.[/vc_column_text][/vc_column][/vc_row][vc_row css=”.vc_custom_1697799034418{padding-bottom: 40px !important;}” conditional_render=”[{"value_role":"administrator"}]”][vc_column width=”1/2″][vc_column_text] Key Benefits Excellent mechanical performance High reactivity and printing speed Rigorously tested to ensure optimal performance Globally available technical support Scott Bader is a reputable manufacturer with over 100 years of experience and expertise [/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text] How To Use Crestaform Rapid 2.0 Always shake or mix the resin thoroughly before use. Open the container and pour the appropriate amount of resin into the tank according to the size of the printer model • make sure to not spill the resin onto the printer, LCD screen or anywhere outside of the resin tank. If not used for a long time, please filter the resin and pour the resin into the storage container. [/vc_column_text][/vc_column][/vc_row][vc_row css=”.vc_custom_1697799042479{padding-bottom: 40px !important;}” conditional_render=”[{"value_role":"administrator"}]”][vc_column width=”1/2″][vc_column_text] Recommended Cleaning Soak the print in a clean IPA bath for a minimum of 2 minutes. Alternatively, rinse the part with IPA until all the visible uncured resin has been removed. Reusing IPA in multiple cleans can reduce the cleanliness and clarity of a print. [/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text] Recommended Post-Curing Post-cure as soon as possible after completion of printing. Post-cure every print for a minimum of 10 minutes under a dedicated UV curing lamp operating at 405 nm wavelength. Alternatively, you can leave the print to cure for a minimum of 2 hours under direct sunlight. Temperature-assisted UV curing will increase the rigidity of the print. [/vc_column_text][/vc_column][/vc_row][vc_row css=”.vc_custom_1697799437444{padding-bottom: 40px !important;}” conditional_render=”[{"value_role":"administrator"}]”][vc_column][vc_column_text] Typical Printing Parameters* *For DLP printers, it is recommended that light power is reduced to around 2.5mW/cm2[/vc_column_text][/vc_column][/vc_row]
